Search results

The purpose of this paper is to examine the influence of transparency on consumers' judgment and decision-making.

This study uses an experimental research design in which participants' negative emotions dynamically change driven by group emotional interactions when they are experiencing a group complaint.

The experimental results show that compared with opaque products, transparent products make consumers rely more on emotions to make judgments and decisions (Experiment 1). It is precise because transparency increases the influence of emotion on consumers' judgment and decision-making that positive emotion makes consumers' evaluation and willingness to pay higher, while negative emotion makes consumers' evaluation and willingness to pay lower (Experiments 2 and 3). Transparency will also affect consumers' subsequent judgment and decision-making methods, so they are more inclined to choose the option with the dominant emotional dimension (Experiment 4).

Previous studies mainly focus on the impact of transparent packaging on consumers and discuss the impact of transparent packaging on consumer product evaluation and consumption quantity. This study proves that product-related transparent elements can also affect consumers' decision-making methods, making them more dependent on emotions to make decisions, enriching the research on the influencing factors of consumer decision-making methods.

This study aims to regarding the application of traditional pulse frequency modulation control full-bridge LLC resonant converters in wide output voltage fields such as on-board chargers, there are issues with wide frequency adjustment ranges and low conversion efficiency.

To address these issues, this paper proposes a fixed-frequency pulse width modulation (PWM) control strategy for a full-bridge LLC resonant converter, which adjusts the gain by adjusting the duty cycle of the switches. In the full-bridge LLC converter, the two switches of the lower bridge arm are controlled by a fixed-frequency and fixed duty cycle, with their switching frequency equal to the resonant frequency, whereas the two switches of the upper bridge arm are controlled by a fixed-frequency PWM to adjust the output voltage. The operation modes of the converter are analyzed in detail, and a mathematical model of the converter is established. The gain characteristics of the converter under the fixed-frequency PWM control strategy are deeply analyzed, and the conditions for implementing zero-voltage switching (ZVS) soft switching in the converter are also analyzed in detail. The use of fixed-frequency PWM control simplifies the design of resonant parameters, and the fixed-frequency control is conducive to the design of magnetic components.

According to the fixed-frequency PWM control strategy proposed in this paper, the correctness of the control strategy is verified through simulation and the development and testing of a 500-W experimental prototype. Test results show that the primary side switches of the converter achieve ZVS and the secondary side rectifier diodes achieve zero-current switching, effectively reducing the switching losses of the converter. In addition, the control strategy reduces the reactive circulating current of the converter, and the peak efficiency of the experimental prototype can reach 95.2%.

The feasibility of the fixed-frequency PWM control strategy was verified through experiments, which has significant implications for improving the efficiency of the converter and simplifying the design of resonant parameters and magnetic components in wide output voltage fields such as on-board chargers.

This paper examines whether technological changes that promote communications between investors and managers help bridge the gap in the cost of equity capital among firms in different regions.

We use the online interaction platforms of listed firms in China and utilize brokerage presence (BP) to capture the geographic distribution of financial factors. We explore whether online interactions would reduce the cost of equity to a greater extent for firms located in low brokerage presence regions (hereafter “low-BP firms”) than those in high brokerage presence regions (hereafter “high-BP firms”).

We find low-BP firms benefit more from an improved information environment created by online interactions. We also find that posts about low-BP firms are more value-relevant and useful in processing corporate disclosures. Further, a higher number of interactions significantly enhances more informational efficiency for low-BP firms, and the effect of reducing the gap in financing costs is more pronounced when corporate information is complex.

We conclude that online interactions alleviate geography-induced information frictions and create a relatively level playing field for firms located in all regions.

Based on path–goal theory and social learning theory, this research is aimed at investigating how authentic leadership can influence team performance in virtual teams, specifically the mechanisms through the mediator of high-quality interpersonal relationships and the moderator of task interdependence.

The valid data of this research were collected from 90 virtual teams including 388 team members and their 90 leaders with a time-lag in China, and then the data were mainly analyzed by the hierarchical multiple regression and bootstrapping method to test the hypotheses.

The research results reveal that authentic leadership can positively influence virtual team performance. High-quality interpersonal relationships mediate the relationship between authentic leadership and virtual team performance. Furthermore, the indirect relationship between authentic leadership and virtual team performance via high-quality interpersonal relationships is moderated by task interdependence.

Team performance as an important kind of team effectiveness is crucial to the virtual team's advantage and success. This research enriches the knowledge on the relationship between authentic leadership and virtual team performance, which contributes to the virtual leadership effectiveness and virtual team management.

In response to increasing demand for a fully customized and individualized home environment, mass customization (MC) has been suggested as an effective strategy to fulfill the customer’s customization needs while keeping production cost-effectiveness. However, in current practice, the implementation of the MC in the industrialized housing industry has not achieved an ideal level. Little effort was devoted to customer value generation and achieving lean production in a multi-disciplinary MC environment. In this concern, a highly efficient and flexible production information system is expected to capture accurately the customer’s demand and efficiently perform work planning for encouraging customer involvement and mass efficiency production.

To gain an insight into the development of the MC production information system for the housing industry and to depict the interaction among system modules, this study used a design science research methodology for a case study of customized cabinet production information system development.

A prototype of the production information system was proposed in this paper, supported by three information technologies to facilitate the MC implementation in the millwork manufacturer. A focus group discussion method was carried out for evaluating the system feasibility and the subsequent survey analysis on the virtual reality (VR) interface experiment. The evaluation process results showed that the VR interface is an effective medium for design information communication and encourages customer involvement. Most participants believed that the proposed production information system could generally benefit the MC implementation and improve production efficiency.

This study integrated lean production principles along with building information modelling, VR and discrete-event simulation in the production information system to assist the manufacturer in effectively handling variant product information and enabling quicker reactions in response to diverse customer requirements in housing industries. The coordination among system modules and the managed information flow could be a valuable reference for future MC production system development in housing industries.

Polyurethane concrete (PUC), as a new type of steel bridge deck paving material, the bond-slip pattern at the interface with the steel plate is not yet clear. In this study, the mechanical properties of the PUC and steel plate interface under the coupled action of temperature, normal force and tangential force were explored through shear tests and numerical simulations. An analytical model for bond-slip at the PUC/steel plate interface and a predictive model for the shear strength of the PUC/steel plate interface were developed.

The new shear test device designed in this paper overcomes the defect that the traditional oblique shear test cannot test the interface shear performance under the condition of fixed normal force. The universal testing machine (UTM) test machine was used to adjust the test temperature conditions. Combined with the results of the bond-slip test, the finite element simulation of the interface is completed by using the COHENSIVE unit to analyze the local stress distribution characteristics of the interface. The use of variance-based uncertainty analysis guaranteed the validity of the simulation.

The shear strength (τ_f) at the PUC-plate interface was negatively correlated with temperature while it was positively correlated with normal stress. The effect of temperature on the shear properties was more significant than that of normal stress. The slip corresponding to the maximum shear (D₁) positively correlates with both temperature and normal stress. The interfacial shear ductility improves with increasing temperature.

Based on the PUC bond-slip measured curves, the relationship between bond stress and slip at different stages was analyzed, and the bond-slip analytical model at different stages was established; the model was defined by key parameters such as elastic ultimate shear stress τ₀, peak stress τ_f and interface fracture energy G_f.

The purpose of this paper is to evaluate multinational enterprises’ (MNEs) performance and impact in contexts beyond their own internal objectives.

Based on an “eclectic” paradigm and the range of motivations, the framework is designed around three layers of evaluation: “efficiency” as static optimisation, “growth and development” as the dynamics of change on a purely economic view; political/economic sphere in terms of the outcomes of “distribution”, and “sovereignty” on the more purely political concern of how MNEs may undermine countries’ policy independence.

MNE and national economies have to use current sources of competitiveness efficiently while addressing the necessity to reinforce and refocus them through time. Within these broad agendas, significant interactions and outcomes reflect a range of contingencies conditioned by both MNE objectives and hosts’ competitive status.

The paper concerns economics and MNE role in globalisation. The paper defines a framework of four generic evaluative issues of MNE performance, which subsume a wider range of important but more niche concerns.

This study aims to examine the influence of task interdependence on team members’ Moqi in virtual teams in China. The authors also aim to identify virtual collaboration as a mediator and distributive justice climate as a moderator in this relationship.

The data were collected from a sample of 87 virtual teams (including 349 individuals) from various Chinese companies through a three-wave survey. Hierarchical regression analysis, path analysis, bootstrapping method and multiple validity tests were used to examine the research model.

In virtual teams in China, task interdependence has a significantly positive influence on team members’ Moqi; Virtual collaboration mediates the relationship between task interdependence and team members’ Moqi; The distributive justice climate positively moderates the relationship between task interdependence and virtual collaboration, as well as the indirect effect of virtual collaboration on the relationship between task interdependence and team members’ Moqi.

In virtual teams, leaders can facilitate team members’ Moqi by designing highly interdependent tasks, encouraging team members to engage in virtual collaboration and cultivating a climate of high attention distributive justice.

This is one of the first studies to pay to the Moqi among team members rather than supervisor-subordinate relationships and further examine how team members’ Moqi is predicted by task interdependence via the mediation of virtual collaboration with the distributive justice climate playing a moderating role.